The Jumbo Jiffy Gun is powered by an air and water combination to propel Elliott's wide range of reusable shoot through devices. Soft deposits such as mud and algae are removed from the tube in seconds!
Jumbo Jiffy Gun Tube Cleaning Systems are the preferred tools for cleaning condenser tubes in power utility plants, pulp, paper, steel mills and petrochemical plants.
The Jiffy Gun is powered by an air and water combination to propel Elliott Tool's wide range of reusable shoot through devices. Soft deposits such as mud and algae are removed from the tube in seconds!
Elliott's Jiffy Gun Tube Cleaning Systems are the preferred tools for cleaning condenser tubes in power utility plants, pulp, paper, steel mills and petrochemical plants.
Soot Buster M5784-00, for cleaning firetube boilers and oil field drill pipes, is a pneumatically actuated cleaning tool that propels itself inside of tubes at 1.5 feet per second and scrubs the tube ID with each pulse.
Simply insert it into the tube and the unique oscillating action of the attached brush will drive the cleaner to the end of the tube. When it senses the end of the tube, it reverses the direction of thrust and returns to the operator.
With a capability of cleaning 60 tubes per hour, the time required to clean a firetube boiler or oil field drill pipe is greatly reduced.
Elliott Tool's Heat Exchanger Tube Cleaners utilize a rigid shaft to provide high torque cleaning to remove hard deposits often found in heat exchanger tubes. These cleaners are ideal for use in sugar mills, paper mills, chemical plants, and oil refineries.
The trigger-operated cleaner features an air-powered motor than remains external to the tube, providing a powerful rotary motion to the shaft and cleaning tool. The 5224XL utilizes water flush operation to wash away all those loose deposits.
Air purge models are also available for any cleaning application where water flush can not be used.
Elliott Tool's Die-Hard™ is the first cableless tube cleaner that successfully cleans light to medium deposits found in chiller, condenser, and heat exchanger tubes.
Water pressure is utilized instead of a spinning cable to provide the power for the brushing action. A patented pulse-jet actuator with brush provides a quad cleaning action to flush tube debris such as scale, mud, and algae out the back end of the tube. The Die-Hard™'s quad cleaning action enables you to be more productive while getting tubes cleaner!
Elliott Tool Roto-Jet Cleaning Systems are an effective solution to increasing chiller, condenser, and other heat exchanger efficiency.
Elliott Tool offers a variety of Roto-Jet Tube Cleaners to suit your specific application needs:
All of the Roto-Jet Tube Cleaning Systems use flexible shafts and cleaning tools to flush deposits free from the tubes, enabling you to increase heat transfer efficiencies while reducing your heat transfer costs.
Elliott Tool's D600 Series Air Turbine Style Curved Tube Cleaners are ideal for 0.791” to 2.124” ID curved tubes (20.1mm to 54.0mm).
The air turbine style motor is sized for optimum performance and power to drive the cleaning head down the tube at a high speed, removing light to medium deposits of scale, mud, and other process residues.
Elliott Tool's 1100 Series Air Turbine Style Straight Tube Cleaners are ideal for tubes 2.250” to 13.225” ID (57.2mm to 335.9mm) commonly found in process transfer lines.
The air turbine style motor design provides an immediate and powerful startup to drive the cleaning head down the tube at a high speed, removing medium to heavy deposits of scale, mud, and other process residues.
For tube ID range 6.250” to 13.225” (158.8mm to 335.9mm) air turbine motors will be equipped with motor sleeves to allow the use of small, lightweight motors, reducing the size of the operating hose required.
Elliott Tool's 1300 Series Air Turbine Style Straight Tube Cleaners are ideal for 1.750” to 3.999” ID (44.5mm to 101.6mm) commonly found in firetube and watertube boilers.
The air turbine style motor design provides an immediate and powerful startup to drive the cleaning head down the tube at a high speed, removing medium to heavy deposits of scale, mud, and other process residues.
Elliott Tool's 1300 Series Air Turbine Style Curved Tube Cleaners are ideal for 2.125” to 4.999” ID curved tubes (54.0mm to 127.0mm).
The air turbine style motor is sized for optimum performance and power to drive the cleaning head down the tube at a high speed, removing medium to heavy deposits of scale, mud, and other process residues.
Elliott Tool's D600 Series Air Turbine Style Curved Tube Cleaners are ideal for 0.791” to 2.124” ID curved tubes (20.1mm to 54.0mm).
The air turbine style motor is sized for optimum performance and power to drive the cleaning head down the tube at a high speed, removing light to medium deposits of scale, mud, and other process residues.
Elliott Tool's 1100 Series Air Turbine Style Curved Tube Cleaners are ideal for 5.000” to 13.225” ID curved tubes (127.00mm to 335.92mm).
The air turbine style motor is sized for optimum performance and power to drive the cleaning head down the tube at a high speed, removing medium to heavy deposits of scale, mud, and other process residues.
For tube ID range 5.000” to 13.225” (127.0mm to 335.9mm) air turbine motors will be equipped with motor sleeves to allow the use of small, lightweight motors, reducing the size of the operating hose required.
Keep your aluminum smelter siphon tubes meeting your production requirements while reducing operating cost with Elliott’s powerful siphon tube reaming motors and drills